Elastocon manufactures instruments for material testing
The objective of Elastocon is to manufacture instruments giving reliable results for existing test methods and to develop new instruments for new test methods.
Elastocon manufactures instruments for testing of rubber and plastic materials
- Specimen preparation
- Ageing ovens
- Stress relaxation and creep
- Low temperature testing
- Windscreen fogging
- Computerised testing
- Electrical tests
- Custom built instruments
- Calibration service
- Cell and Cabinet Ageing Ovens
Elastocon presents our latest generation of ageing ovens for the precision ageing of polymer materials. We have produced and developed high precision cell ovens and ageing cabinets since 1987. Benefitting from this long experience our ovens represent a major step forward in the design of such instruments.
Manufactured in 4 or 6 cell configurations, the cell ovens are available with either single temperature controller or multiple (individual) cell controllers and with a temperature range of 40 °C to 200 °C, or 40 °C to 300 °C.
- Stress Relaxation System
Relaxation system for continuous measurement in either compression or tension. Meets the requirements in ISO 3384, ISO 6914 and ASTM D6147.
- Low Temperature Testers
Elastocon TR Tester, ET 01-II, for determination of low temperature characteristics by the temperature retraction procedure according to ISO 2921 and ASTM D1329.
- Windscreen Fogging Tester
The Windscreen Fogging Tester, EB 03, is an equipment for determination of wind-screen fogging according to ISO, SAE and other automotive standards. The equipment has a compact design with the heating bath and cooling bath integrated in one casing.
- Hot Set Testers
The Hot Set Oven Basic EB 30 is made for hot set testing of cable material according to IEC 60811-507 and equivalent standards.
It is built on a heating cabinet with window in the door. The inner chamber of stainless steel is equipped with illumination. Measurements are made through the window with a laser pointer that is mounted on a measuring scale placed on the door. The line laser will automatically shut off when the door is opened.
- Specimen Preparation
Pneumatic specimen cutting press, EP 02, and manual specimen cutting press, EP 08, for preparation of test specimens of rubber and plastic materials, by punching. The cutting presses are small and have a system for quick change of cutting dies. They stand secure on rubber feet and do not need to be attached to the table.